AIR PREPARATION

Festo air preparation combination units ensure the correct compressed air quality and filters compressor oil, condensate and dirt particles from the air. Depending on the application, a service unit consists of a pressure regulator, various filters, a branch module and pressurization and exhaust valves.

The Festo MS series offers the widest variety of filter regulator units, ideal for every application. The filter unit offers good particle separation at high flow rates. The pressure regulator has good control characteristics with low hysteresis. A return flow function and a secondary vent are integrated as standard in the MS series.

Festo offers the widest range of compressed air filters for creating a wide variety of compressed air purity classes. It is ideal for every application. Coarse filters, fine and micro filters according to the coalescence filter principle and oil vapor separators based on active carbon filters are available

Festo offers the widest range of compressed air regulators. They are ideal for any application and are characterized by a high flow rate performance with very good control characteristics and low hysteresis. A return flow function and a secondary exhausting are integrated as standard in the MS series. It is available in four sizes and can be selected with mechanical pressure gauge, alternatively with pressure sensor with and without display for monitoring via the system control.

Festo compressed air lubricators supply the compressed air with a finely dosable quantity of oil for pneumatic components. The oil lubricators of the MS series can be installed as modules in service units according to the simple modular system

The MS series has the most comprehensive range of manually, pneumatically and electrically operated shut off valves. The valves of the MS series are characterized by a high flow rate performance, integratable sensors and certified safety valves for safe exhausting of pneumatic systems. They are ideal for every application.

Festo’s pneumatically and electrically operated valves are configurable with and without integrated soft-start function. Pneumatically and electrically operated soft start valves are also available as individual devices.

Festo’s soft start/quick exhaust valves MS6-SV cut off the power to critical components in the blink of an eye when an emergency stop is triggered. They also restart the system with the same care and reliability once the problem has been eliminated.

Festo offers both membrane and disccant dryers which in conjunction with their filter products can get air to quality levels required by most industrial and lab applications

The MS series offers many variants of branch or compressed air porting block modules, ideal for every application. If required, they can be configured with integrated non return valve, pressure sensor with and without display and mechanical pressure switch ready for installation

Festo air preparation combination units ensure the correct compressed air quality and filters compressor oil, condensate and dirt particles from the air. Depending on the application, a service unit consists of a pressure regulator, various filters, a branch module and pressurization and exhaust valves.

The Festo MS series offers the widest variety of filter regulator units, ideal for every application. The filter unit offers good particle separation at high flow rates. The pressure regulator has good control characteristics with low hysteresis. A return flow function and a secondary vent are integrated as standard in the MS series.

Festo offers the widest range of compressed air filters for creating a wide variety of compressed air purity classes. It is ideal for every application. Coarse filters, fine and micro filters according to the coalescence filter principle and oil vapor separators based on active carbon filters are available

Festo offers the widest range of compressed air regulators. They are ideal for any application and are characterized by a high flow rate performance with very good control characteristics and low hysteresis. A return flow function and a secondary exhausting are integrated as standard in the MS series. It is available in four sizes and can be selected with mechanical pressure gauge, alternatively with pressure sensor with and without display for monitoring via the system control.

Festo compressed air lubricators supply the compressed air with a finely dosable quantity of oil for pneumatic components. The oil lubricators of the MS series can be installed as modules in service units according to the simple modular system

The MS series has the most comprehensive range of manually, pneumatically and electrically operated shut off valves. The valves of the MS series are characterized by a high flow rate performance, integratable sensors and certified safety valves for safe exhausting of pneumatic systems. They are ideal for every application.

Festo’s pneumatically and electrically operated valves are configurable with and without integrated soft-start function. Pneumatically and electrically operated soft start valves are also available as individual devices.

Festo’s soft start/quick exhaust valves MS6-SV cut off the power to critical components in the blink of an eye when an emergency stop is triggered. They also restart the system with the same care and reliability once the problem has been eliminated.

Festo offers both membrane and disccant dryers which in conjunction with their filter products can get air to quality levels required by most industrial and lab applications

The MS series offers many variants of branch or compressed air porting block modules, ideal for every application. If required, they can be configured with integrated non return valve, pressure sensor with and without display and mechanical pressure switch ready for installation

CONTACT AFFILIATED CONTROL


CONTACT AFFILIATED CONTROL